Product Introduction
This product is an anti-bacterial coating designed for wood substrate, with zinc ion as an anti-bacterial component, with good safety, wide application and so on. In the coating surface quickly form dense antibacterial protective film, improve antibacterial, anti-mildew, anti-virus performance, can effectively protect and reduce the spread of disease.
Product Features
High hardness, good adhesion;
Strong antibacterial effect, large intestine, grape, albicans, such as antibacterial rate of 99%;
Long-lasting efficacy, UV irradiation for more than 100 hours, non-attenuation of antibacterial;
Water resistance, acid and alkali resistance, good stability;
Widely used, safe and environmentally friendly, non-toxic tasteless.
Usage method
Choose the appropriate process of spraying, dipping, scraping, rubbing, spraying and so on for painting. It is recommended to try painting in a small area before application.
Step 1: Primer coating. Clean and dust the polished substrate, select the appropriate process coating primer, after coating static for 3 minutes;
Step 2: Heat Cure the primer. Heat at 100℃ for 1-2 minutes.
Step 3: Follow steps 1 and 2 to do a second primer coating;
Step 4: Top Coat. Sanding, dust removal, select the appropriate process coating;
Step 5: finish varnish light curing. 3000W UV lamp (10~20cm, wavelength 365nm) illumination for 8~10 seconds, the coating cured.
Uses
Used for anti-bacterial and anti-virus treatment of wood surface.
Packaging and Storage
Packing: 20 litres/barrel.
Storage: keep in a cool, dry place, away from direct sunlight.
ZNT-W20
Add to shopping cart
Buy
