High hardness, good adhesion;
Good wear resistance, wear less than 0.06 mg (H-18 grinding wheel, 1000 turn);
Excellent adhesion, cross grid adhesion to 0 level;
Resistant to blister, resistant to boiling 4 hours, coating does not fall off;
Easy to operate, suitable for large-scale industrial coating.

Choose the appropriate process of spraying, dipping, scraping, rubbing, spraying and so on for painting. It is recommended to try painting in a small area before application.
Step 1: Primer coating. Clean and dust the polished substrate, select the appropriate process coating primer, after coating static for 3 minutes;
Step 2: Heat Cure the primer. Heat at 100℃ for 1-2 minutes.
Step 3: Follow steps 1 and 2 to do a second primer coating;
Step 4: Top Coat. Sanding, dust removal, select the appropriate process coating;
Step 5: finish varnish light curing. 3000W UV lamp (10~20cm, wavelength 365nm) illumination for 8~10 seconds, the coating cured.