Product Introduction
This product is a high hardness and abrasion resistant coating for wood substrate. It can effectively improve the hardness, abrasion resistance and anti-fouling performance of wood floor through a thin layer of primer and a thin layer of surface coating, it has achieved the effect of more than 10 layers of traditional coating, greatly promoting the product line integration, process optimization, improve the cost control ability, is leading the wood floor surface treatment industry new upgrade products.
Product Features
High hardness, Mitsubishi pencil hardness up to 4H;
Good abrasion resistance,wear and tear＜0.06mg(H-18 grinding wheel,1000turn);
Excellent adhesion, cross grid adhesion to 0 level;
Resistant to blister, resistant to boiling 4 hours, coating does not fall off;
Easy to operate, suitable for large-scale industrial coating.
Usage method
Choose the appropriate process of spraying, dipping, scraping, rubbing, spraying and so on for painting. It is recommended to try painting in a small area before application.
Step 1: Primer coating. Clean and dust the polished substrate, select the appropriate process coating primer, after coating static for 3 minutes;
Step 2: Heat Cure the primer. Heat at 100℃ for 1-2 minutes.
Step 3: Follow steps 1 and 2 to do a second primer coating;
Step 4: Top Coat. Sanding, dust removal, select the appropriate process coating;
Step 5: finish varnish light curing. 3000W UV lamp (10~20cm, wavelength 365nm) illumination for 8~10 seconds, the coating cured.
Uses
Used for the surface of wood flooring wear-resistant hardening treatment.
Packaging and Storage
Packing: 20 litres/barrel.
Storage: keep in a cool, dry place, away from direct sunlight.
MMU-T99
Add to shopping cart
Buy
