Product Introduction
This product is used to stiffen the wood substrate coating, through a thin layer of primer and a layer of surface coating, can effectively improve the hardness of wood floor and anti-fouling performance, to achieve the effect of more than ten layers of traditional coating, greatly promote the production line integration, process optimization, improve the cost control ability, is leading the wood floor surface treatment industry new upgrade products.
Product Features
High hardness, good adhesion;
Good wear resistance, wear less than 0.09 mg (H-18 grinding wheel, 1000 turn);
Resistant to blister, resistant to boiling 4 hours, coating does not fall off;
Easy to operate, suitable for large-scale industrial coating.
Usage method
Choose the appropriate process of spraying, dipping, scraping, rubbing, spraying and so on for painting. It is recommended to try painting in a small area before application.
Step 1: Primer coating. Clean and dust the polished substrate, select the appropriate process coating primer, after coating static for 3 minutes;
Step 2: Heat Cure the primer. Heat at 100℃ for 1-2 minutes.
Step 3: Follow steps 1 and 2 to do a second primer coating;
Step 4: Top Coat. Sanding, dust removal, select the appropriate process coating;
Step 5: finish varnish light curing. 3000W UV lamp (10~20cm, wavelength 365nm) illumination for 8~10 seconds, the coating cured.
Uses
Used for the surface of wood flooring wear-resistant hardening treatment.
Packaging and Storage
Packing: 20 litres/barrel.
Storage: keep in a cool, dry place, away from direct sunlight.
WHU-RUD
Add to shopping cart
Buy
